2010-2014 Ford Mustang Carbon Fiber LG122 Center Console Install – TruFiber / TruCarbon

Description: This guide will show you how to install the 2010-2014 Ford Mustang Carbon fiber LG122 center console made by Trufiber / Trucarbon.

Parts Required:

  1. TruFiber / TruCarbon LG122 Center Console

Tools Required:

  1. Torx Screwdriver
  2. Dremel or Grinder

Step 1: Start by opening the arm rest then removing the shifter knob.

Step 2: Then lift from the rear of the center console to remove. You will need to disconnect the traction control buttons while removing the center console.

Step 3: Remove the shifter knob sleep by depressing the tabs all the way around.

Step 4: Remove the traction control button by depressing the tabs on the side of it.

Step 5: Remove the cup holder by removing the 4 torx screws holding it to the center console.

Step 6: Remove the plastic tabs holding the shift knob flashing using a grinder or dremel. Take your time while removing these. You will need to go all the way around, when complete the flashing will remove easily.

Step 7:  Attach the cup holder to the new center console.

Step 8: Insert the traction control button.

Step 9: Apply double sided tape to the edge of the shifter flashing, then stick to the center console.

Step 10: Re-attach the shifter sleeve.

Step 11: Start inserting the center console and re-connect the traction control button.

Step 12: Clip the center console back into place by pressing down, starting with the front and working your way to the back.

Step 13: Re-attach your shifter knob and you have completed the install.

Written by TruFiber

We specialized in Fiberglass & Carbon Fiber Automotive Parts & Accessories. We would like to emphasize that we work with companies of all sizes, including those just starting out regarding Private Label manufacturing.

Leave a Comment