This guide will show you how to install TruCarbon’s 2010-2014 Mustang Carbon Fiber LG45 Blackout Panel.
Remove the two T10 Torque srews from the trunk lid. There is one on each side of the inner lid.
Start with one corner of the existing panel and pry until it starts to remove from the trunk lid. Slowly work your way to the other side until it has been completely removed. You will here popping noises as the connectors come undone.
Clean the trunk lid where you will be applying the adhesive to connect your new blackout panel.
After cleaning the trunk lid use an alcohol wipe where you will be applying the double sided adhesive.
Remove the protective film from the double sided adhesive.
Line up your new blackout panel with the outer lip of the trunk. Apply pressure where the double sided adhesive has been applied to ensure a flush fit. Enjoy your new carbon fiber blackout panel!