How To Plasti Dip Your 2003 Ford Mustang Rims Without Removing From Car

Description: This guide will show you how to Plasti Dip your 2003 Ford Mustang rims without removing them from the car.

Tools Required: n/a

Parts Required:

  1. Note Cards (or protective covering)
  2. Tape
  3. Plasti Dip

Step 1: Clean your rims then use your covering material to cover up the brakes. We chose to use note cards and that worked out very well. We also taped the air valve although it is not required.

2003 Ford Mustang Rims Prepped For Plasti Dip

Step 2: Apply your first coat of plasti dip to your rims. Don’t over do it, here is our first coat. Make sure to apply evenly with the spray can 6 to 8 inches from the rim.

2003 Ford Mustang Plasti Dip Rims Coat 1

Step 3: You can re-apply every 15-30 minutes. This is the second coat.

2003 Ford Mustang Plasti Dip Coat 2

Step 4: Apply until you reach your desired results. We applied 5 coats.

2003 Ford Mustang Plasti Dip Coat 4

Step 5: Rub your finger on the tire after the plasti dip has dried. This will get a loose skin of plasti dip that went on the tire and slowly peel off the tire.

2003 Ford Mustang Rim Plasti Dip Cleanup

Step 6: Remove the protective material you used to cover the brakes and enjoy!

IMG_14422003 Ford Mustang Plasti Dipped Rims and Emblems


Written by DanTheMan

I am the Founder of I enjoy every minute of creating this website and can't wait to start developing the "big picture" of what I have envisioned for this site. Check back regularly and feel free to use the comments or contact us to ask us a question!

Leave a Comment