Description: This guide will show you how to install the 2005-2009 Ford Mustang CS4 carbon fiber trunk lid by Trucarbon / Trufiber.
- Adjustable Wrench
- 8mm Wrench
- 10mm Wrench
- CS4 Carbon Fiber Trunk Lid
Step 2: Remove the plastic covering the trunk lid components and un-plug the trunk light connection.
Step 3: Disconnect the wiring harnesses.
Step 4: Use an 8mm wrench to remove the trunk locking mechanism.
Step 5: Remove the wiring harness from the zip ties holding it on the trunk.
Step 6: Use a 10 mm wrench to remove the bolts holding the trunk latch mechanism.
Step 7: Use 10mm wrench to loosen the bolts holding the trunk. Then with a helping hand remove them and the trunk.
Step 8: Remove the third brake light from the original trunk.
Step 9: Remove the clips that help fasten the trunk lock from the old trunk.
Step 10: Align and bolt on your new carbon fiber trunk using the 10mm bolts.
Step 11: Install your 3rd brake light on the new carbon fiber trunk lid.
Step 12: Re-install the clips for the locking mechanism.
Step 13: Bolt on the locking mechanism using the 8mm bolts.
Step 14: Install the trunk latch using the 10mm bolts.
Step 15: Re-connect the locking mechanism and brake light wires.
Step 16: Re-install the wiring holders.
Step 17: Re-clip the trunk light and install the plastic covering.
Step 18: Re-install the trunk bumpers on both sides.